DELACK 3D Printer Enclosure Kit with LED Light

KIT ONLY NO PRINTED PARTS INCLUDED

The DELACK Enclosure by 3D Sourcerer is designed specifically for the Prusa MK4, Prusa Mini, and Prusa MK3 series of 3D printers. This 3D printer enclosure kit contains all of the parts needed to fully assemble the enclosure EXCEPT the 3D printed parts, which are available for download. Featuring a modular design, this 3D printer enclosure for the Prusa MK4, Prusa Mini, and Prusa MK3 is designed to be customizable for your specific needs. Whether you want to add a custom name to your 3D printer enclosure, setup a camera for remote print monitoring, or add a ventilation system to your 3D printer setup, we have created accessory prints to best suite your 3D printing needs! We've also included extras such as an LED light, a USB C/A thumb drive, and a set of bearings for a fillament roller to complete your 3D printing setup!

• COMPATIBLE WITH PRUSA MK4, PRUSA MINI & PRUSA MK3 - Create a stable environment for your Prusa MK4, Prusa Mini, or Prusa MK3 with the DELACK Enclosure. WIth a wide variety of filament routing options, the DELACK Enclosure is compatible with a wide variety of 3D printing setups and is adaptable to your specific workspace.
• UPGRADE YOUR LACK ENCLOSURE - If you are looking to upgrade your LACK Enclosure, this is the perfect enclosure for you. Made to fit perfectly on an IKEA LACK table, the DELACK Enclosure is a step up in quality as well as functionality.
• LED LIGHT INCLUDED - Included in the DELACK Enclosure is an LED light with a 5V power brick so that you can add an LED light to your 3D printer enclosure for easily viewing your 3D prints at night. We've managed to make the prints for the LED light compatbile with the smaller print bed of the Prusa Mini so that everyone can add the LED to their setup!
• 550MM x 486MM x 450MM (21.7" x 19.1" x 17.7") SIZE - With a length perfectly matching the IKEA LACK table, this enclsosure will fit flush with the front and back of an IKEA LACK table. If you perfer to place your 3D printer enclosure on your desk or countertop, the DELACK is narrower than an IKEA LACK table, saving space while still providing the perfect amoutn of space for the Prusa MK4, Prusa Mini, or Prusa MK3 to function properly.
• LED LIGHT INCLUDED - Included in the DELACK Enclosure is an LED light with a 5V power brick so that you can add an LED light to your 3D printer enclosure for easily viewing your 3D prints at night. We've managed to make the prints for the LED light compatbile with the smaller print bed of the Prusa Mini so that everyone can add the LED to their setup!
• COMPATIBLE WITH 120MM NOCTURA FANS - The DELACK Enclosure features a cutout on the back panel of plexiglass for adding a 120mm Noctura fan for temperature control of your 3D printer enclosure. If you prefer to print without a fan, a cover for the cutout can be printed and use to fill the cutout at the back of the 3D printer enclosure.
• WYZE CAM V3 FOR REMOTE MONITORING - Monitoring your Prusa 3D printers can be a challenge since a camera is not built in to the 3D printer. With the DELACK 3D Printer Enclosure, we have added a simple corner adapter so that you can add a WYZE CAM V3 to your enclosure for monitoring your printer remotely.
• REMOVABLE CORNER GUARDS FOR ADDED SAFETY - The plexiglass corners of 3D printer enclosure can be sharp - to prevent unwanted harm, removable corner guards are available to cover the corners of the enclsoure for added safety.
• HEPA FILTER FOR AIR FILTRATION - If you print with materials that cause fumes, add a HEPA filter in addition to a 120mm fan to your 3D printer enclosure. With the DELACK 3D Printer Enclosure, a filter mount made for an economical HEPA filter can be easily added to the 120mm fan setup.
• 4 INCH DUCT FOR VENTING FUMES - If you prefer to externally ventilate your 3D printer, the DELACK 3D Printer Enclosure has an adapter for the 120mm fan setup so that you can vent the fumes from your 3D printer enclosure using a 4 inch duct.