Noctua PWM Mount for SUMO/DELACK Enclosure

PARTS REQUIRED

x1 Noctua PWM

CLICK HERE TO BUY THE NOCTUA PWM FAN CONTROLLER ($24.99)

Please print the mount facedown as shown below.  

Run the cables through the channels prior to press fitting the PWM Controller into place from the back.

Gently attach the wires and pull the slack out of the cable after inserting into the PWN Controller.

You can mount the part to the top of the DELACK or SUMO using any of the top bolts (make sure the nut below is pulled snug so that the bolt will reach the nut).